All our Intruder Alarm systems include the following as mandatory to comply with EN 50131-1:2006, CLC/TS 50131-7:2010 standards & PSA 74:2019 requirements.

Starter Kit includes the following:

• Best External Self activating bell module with a 15min cut off and back up battery supply or Best External decoy box with flashing LED.
• Internal sounder (110db)
• Passive infra red detector to scan hall or landing area-depending on outcome of Risk assessment
• Key pad with built in panic button
• Control panel
• 12 volt back up battery(In case of power outage)
• 3 amp fused spur unit
• Certificate of compliance

Choose your own locations of Shock sensors and Motion detectors.

You can add additional detection devices and accessories in the quote builder below.

When choosing detection devices:

• Consider the rooms with external windows accessible from the ground floor of your home.
• Include an additional shock sensor for upstairs rooms with any window above a flat roof like extension, porch, conservatory or extension.
• We recommend having one motion detector located on the landing area upstairs. One motion detector is included in the starter kit.

Detection devices explained

Wirefree Inertia Shock Sensor
A Wirefree Inertia Shock sensor will detect an attempted opening of a door or window by its ability to monitor large and small shock events occurring at the door or window. This is an ideal form of detection and in most cases the Shock sensor devices will alert the system control panel before the intruder will have the opportunity to open the protected door or window.

Wirefree Magnetic Contacts
Magnetic contacts on your doors and windows will detect any unauthorized opening of the doors or windows and alert the system control panel.

Wirefree Motion Detectors
Motion detectors (commonly referred to as Passive Infra-Red detectors or PIR) will detect the infra-red body heat energy of a would-be intruder and signal an alarm event to your system control panel. PIR’s are mainly used to cover large areas of your home or business premises (rooms and offices etc.).These are mainly interior devices, however the Best Security range of PIRs caters for both interior and exterior requirements.

Smoke/Heat Detector
Wireless Smoke/Heat detector is a detection device that will monitor your premises for smoke, heat or both, depending on the chosen programming method when the unit is installed. These units are active 24 hours of the day and will alert the homeowner or a keyholder of the premises, using an instant message and/or the emergency services (i.e. Fire emergency service) by means of a signal to a 24hour monitoring center.

Wirefree Panic Button-Keyfob
The RF keyfob is a convenient fob with simple one touch actions for Arming, Disarming or partially Arming the system. These buttons can also be programed to assist with other day to day activities, such as opening an automated garage gate or door, or turning on lights before entering / leaving your premises.

Wirefree PA/Medical Button is a push button device which can be worn around a person’s neck, on their belt or can be fitted to a stationary structure such as a wall or desk. These units are active 24 hours of the day and will alert the relevant respondent (i.e. family member or minder, emergency services, Police or Ambulance service) by means of a signal to a 24hour monitoring center. The Button can be programmed as a Panic device for security or as a medical device for people who may require monitoring for medical reasons.

Note

Site survey would be required prior to installation to comply with regulatory and statutory standards.